Free design support on every order · Shipping across the USA

How to Measure a Box for Custom Packaging

Getting the size right is the most important part of ordering custom boxes. A box that is too tight is hard to pack and can crush the product, while a box that is too loose lets it move around in transit. The good news is that measuring correctly only takes a few minutes.

Always give inside dimensions

Packaging is quoted on the inside dimensions of the box, because that is the space your product actually has. The board itself has thickness, so the outside of the box will always be a little larger. If you measure an existing box, measure inside it, from wall to wall.

The order: length × width × depth

  1. Length is the longer side of the opening.
  2. Width is the shorter side of the opening.
  3. Depth (or height) is the distance from the opening to the bottom.

The "opening" is the side the product goes in through. For a mailer box that is the top; for a tuck end carton it is the end flap. Giving the measurements in this order means everyone reads them the same way.

Measure the product, then add a little room

Measure the widest point of your product on each side, including caps, pumps, handles or anything that sticks out. Then add a small allowance so it slides in easily, typically a few millimetres or around 1/16" to 1/8" on each dimension for a snug fit. If you are adding tissue paper, an insert or several items together, measure the whole packed bundle instead.

Think about inserts and protection

Fragile products such as glass bottles or electronics usually need an insert to stop them moving. Inserts take up space, so tell us about them when you ask for a quote and we will size the box around both.

Not sure? Send us the product

If you are unsure, send us your product's dimensions or a photo next to a ruler and we will recommend a size. Every order also includes a digital proof showing the dieline, so you can check the dimensions before anything is printed.

Ready to start your packaging?

Get a Free Quote